Machine

Machine Data

Options of Testing

Universal testing machine

Maximum load: 200 kN
test speeds: 0.05 to 250 mm/min
test temperature: -80°C to 340°C

Tension, pressure, bending,
examination of components,
computer-aided investigations

Universal testing machine


Maximum load: 50 kN
test speeds: 0.1 to 750 mm/min
test temperature: - 80°C to 250°C

Tension, pressure, bending,
examination of components,
computer-aided investigations


Universal testing machine


Maximum load: 50 kN
test speeds: 0.1 to 500 mm/min
test temperature: room temperature

Tension, pressure, bending,
examination of components,
computer-aided investigations


Tensile testing machine for small loads

Maximum load: 0.5 N to 5 kN
test speeds: 0.5 to 200 mm/min
test temperature: room temperature

Tension, roll peel test,
tensile test on individual fibers

Hydropulser

Maximum load: 8 and 80 kN,
piston path: 100 mm,
test temperature: RT

Control of force,
path and elongation,
constant-amplitude and/or
fatigue and load increase
tests, measurement of
hysteresis

Hydropulser

Maximum load: 50 kN
piston path: 40 mm,
test temperature: -40 to 200°C

See above
fracture mechanical
Spread of fatigue cracks

Creep test stand

Max. test load 2.5 kN
24 test stands
standard climate (23°C/50% relative humidity)

Creep curves,
long-term investigations

Creep test stand


Max. test load 2.5 kN
24 test stands
test temperature: RT to 160°C

Creep curves,
long-term investigations

Long-term test stand

1) Max.  test load 3 kN space, 33 test stands
2) max. test load 1.5 kN, 20 test stands
3) max. test load 2.0 kN, 12 test stands
test temperature: RT to 95°C
test medium:  water and/or. wetting agent solution

Long-term investigations,
welding factor

Long-term, buckling and fatigue test device

Frequency: 1-5 Hz
stroke length: 0-200 mm
10 test stands
test temperature: RT

Position controlled and dynamical
testing of tensile, compression,
bending, shear or convolution load

Clamping plate 3x4 mª with three servo hydraulic test cylinders

Longitudinal cylinder: 25 to 63 kN
max. piston path: 250 mm
rotating cylinder: 1 kNm
max. rotation angle: 100 °
test temperature: 23°C

Monitoring of force, path and
elongation, constant-amplitude
and/or fatigue and load increase tests,
component investigations,
multiaxial load

Determination of hardness
(Vickers, Knoop)

Area of low load: 2 to 100 N
micro hardness: 0.1 to 2 N 

Determination of Vickers and
Knoop hardnesses, thermoplastics,
thermosettings

Determination of hardness
(Shore A and D)

Load facilities

Determination of Shore A and D
hardnesses, caoutchouc and
elastomers

Burst testing equipment

Examinations under internal water pressure, exposed to air, to determine resistance to internal pressure in welded components;
variable speed of pressure-build-up;
maximum test pressure : 25 bar

Computer control and self-contained
evaluation of trials:
Clamping plates for various
test specimens

Investigations on heat deflection stability

5 measuring point
bearing distance: 100 mm

Heat deflection temperature  
HDT/A and HDT/B, ISO 75

Ultrasonic dipping test stand

Range of frequencies: 1 to 100 MHz
max. geometry of test specimen:
500 x 500 mm²

Pulse/echo technique,
scanning by sound,
computer-aided test stand,
damage in plastics,
ceramics or metals, measurement
of C and D images

Sound emission equipment

Piezoelectric resonance sensor
with main resonance: 200 kHz

Detection of characteristic
damage restrictions,
measurement of sounds
occurred, their duration,
sum and total energy

CNC coordinates measuring equipment

Range of measurement: 400x250x200 mm³
accuracy: (3 + L/150) µm, L in mm
resolution: 0.5 µm

Scan and video system